bar top left
bar top right
left curve
right curve
Welcome, Guest
Go to bottom
Post Reply
Post New Topic
Page: 1
TOPIC: extension problem
#91770
extension problem 5 Months ago Karma: 2
The problem is the following: i call to one extension, and the extension that rings is another extension. i even call the did and the other extension is the one which ring.
Enter code here   
Please note: although no board code and smiley buttons are shown, they are still usable.
asantana
Junior Boarder
Posts: 69
graphgraph
User Offline Click here to see the profile of this user
Reply Quote
 
#91793
Re:extension problem 5 Months ago Karma: 2
Please give more details... is there any follow me setup? what kind of extention is that? can you paste some info from the cli?
Enter code here   
Please note: although no board code and smiley buttons are shown, they are still usable.
kz_test
Fresh Boarder
Posts: 32
graphgraph
User Offline Click here to see the profile of this user
Reply Quote
 
#91814
Re: extension problem 5 Months ago Karma: 2
Extension.
Name : 1010
Secret : <Set>
MD5Secret : <Not set>
Context : from-internal
Language :
AMA flags : Unknown
Transfer mode: open
MaxCallBR : 384 kbps
CallingPres : Presentation Allowed, Not Screened
Call limit : 2147483647
Callgroup :
Pickupgroup :
Callerid : "device" <1010>
ACL : Yes
Sess-Timers : Accept
Sess-Refresh : uas
Sess-Expires : 1800 secs
Sess-Min-SE : 90 secs
RTP Engine : asterisk
Codec Order : (ulaw:20,alaw:20,gsm:20,g729:20)
Auto-Framing: No




Global Settings:
----------------
UDP Bindaddress: 0.0.0.0:5060
TCP SIP Bindaddress: Disabled
TLS SIP Bindaddress: Disabled
Videosupport: No
Textsupport: No
Ignore SDP sess. ver.: No
AutoCreate Peer: No
Match Auth Username: No
Allow unknown access: Yes
Allow subscriptions: Yes
Allow overlap dialing: Yes
Allow promisc. redir: No
Enable call counters: No
SIP domain support: No
Realm. auth: No
Our auth realm asterisk
Use domains as realms: No
Call to non-local dom.: Yes
URI user is phone no: No
Always auth rejects: Yes
Direct RTP setup: No
User Agent: FPBX-2.8.1(1.8.7.0)
SDP Session Name: Asterisk PBX 1.8.7.0
SDP Owner Name: ***
Reg. context: (not set)
Regexten on Qualify: No
Legacy userfield parse: No
Caller ID: Unknown
From: Domain:
Record SIP history: Off
Call Events: Off
Auth. Failure Events: Off
T.38 support: No
T.38 EC mode: Unknown
T.38 MaxDtgrm: -1
SIP realtime: Disabled
Qualify Freq : 60000 ms
Q.850 Reason header: No
Store SIP_CAUSE: No

Network QoS Settings:
---------------------------
IP ToS SIP: CS3
IP ToS RTP audio: EF
IP ToS RTP video: AF41
IP ToS RTP text: CS0
802.1p CoS SIP: 4
802.1p CoS RTP audio: 5
802.1p CoS RTP video: 6
802.1p CoS RTP text: 5
Jitterbuffer enabled: No

Network Settings:
---------------------------
SIP address remapping: Disabled, no localnet list
Externhost: <none>
Externaddr: (null)
Externrefresh: 10

Global Signalling Settings:
---------------------------
Codecs: 0xe (gsm|ulaw|alaw)
Codec Order: ulaw:20,alaw:20,gsm:20
Relax DTMF: No
RFC2833 Compensation: No
Symmetric RTP: No
Compact SIP headers: No
RTP Keepalive: 0 (Disabled)
RTP Timeout: 0 (Disabled)
RTP Hold Timeout: 0 (Disabled)
MWI NOTIFY mime type: application/simple-message-summary
DNS SRV lookup: Yes
Pedantic SIP support: Yes
Reg. min duration 60 secs
Reg. max duration: 3600 secs
Reg. default duration: 120 secs
Outbound reg. timeout: 20 secs
Outbound reg. attempts: 0
Notify ringing state: Yes
Include CID: No
Notify hold state: Yes
SIP Transfer mode: open
Max Call Bitrate: 384 kbps
Auto-Framing: No
Outb. proxy: <not set>
Session Timers: Accept
Session Refresher: uas
Session Expires: 1800 secs
Session Min-SE: 90 secs
Timer T1: 500
Timer T1 minimum: 100
Timer B: 32000
No premature media: Yes
Max forwards: 70

Default Settings:
-----------------
Allowed transports: UDP
Outbound transport: UDP
Context: from-sip-external
Force rport: No
DTMF: rfc2833
Qualify: 0
Use ClientCode: No
Progress inband: Never
Language:
MOH Interpret: default
MOH Suggest:
Voice Mail Extension: *97
Enter code here   
Please note: although no board code and smiley buttons are shown, they are still usable.
asantana
Junior Boarder
Posts: 69
graphgraph
User Offline Click here to see the profile of this user
Reply Quote
 
#91815
add: 5 Months ago Karma: 2
there is not follow me
Enter code here   
Please note: although no board code and smiley buttons are shown, they are still usable.
asantana
Junior Boarder
Posts: 69
graphgraph
User Offline Click here to see the profile of this user
Reply Quote
 
#91842
Re:extension problem 5 Months ago Karma: 2
ok.

Let's say that you call from 1011 to 1010.. Witch extension rings? Other than 1010??? If so paste some output from cli?
Enter code here   
Please note: although no board code and smiley buttons are shown, they are still usable.
kz_test
Fresh Boarder
Posts: 32
graphgraph
User Offline Click here to see the profile of this user
Reply Quote
 
#91864
Re: extension problem 5 Months ago Karma: 2
Thanks, i solved the problem. It was i telephone error, which takes some configuration from other. As soon as we connect the phone to the network, A chaos was shown.
Enter code here   
Please note: although no board code and smiley buttons are shown, they are still usable.
asantana
Junior Boarder
Posts: 69
graphgraph
User Offline Click here to see the profile of this user
Reply Quote
 
#91865
Re:extension problem 5 Months ago Karma: 2
no prob

Glad you solved it!
Enter code here   
Please note: although no board code and smiley buttons are shown, they are still usable.
kz_test
Fresh Boarder
Posts: 32
graphgraph
User Offline Click here to see the profile of this user
Reply Quote
 
Go to top
Post Reply
Post New Topic
Page: 1
Moderators: Bob, jgutierrez
Protected by Spam Fighter